THINGS THAT SHOULD NOT BE TAKEN IN MOTHERBOARD REPAIR

1. MOTHERBOARD INVESTIGATION STARTED WITHOUT STANDARD ANALYSIS PROCEDURE.
2. STARTING WITHOUT TAKE OFF BAT CMOS
3. ADAPTER INSTALLED IN A LONG TIME IN SHORT MOTHERBOARD.
4. INSTALLING /uninstaling IC's WHEN ADAPTER plug in.
5. FEET TO DIRECTLY MEASURE VOLTAGE CHIP / PU WITH PROBE blunt (FIND POINT MEASURE FEET ON PART D traversed PU OR CHIP)
6. REMOVING SUPER IO (WINBOND, ITE, SMC, VIA, NUVOTON, ETC) BIOS WITHOUT REMOVING BIOS IC
7. REFLOWING / SOLDERING ON ONE POINT WITHOUT TEMPRATURE Controle IN A LONG TIME.
8. OPEN PAIRS IC REPEATED AGAIN THAT CAN DAMAGE THE IC (OVER HEATING)
9. PLUG IN ADAPTER WITHOUT CHECKING THE electrical MATERIAL conductor STICK IN MOTHERBOARD
10. TURN / DO test on the MOBO WITHOUT HEATSINK AND FAN
11. Heats CHIP TEMPERATURE ABOVE 180 'WITHOUT ADEQUATE TOOL.
12. REMOVING IC'S / CHIP'S WITH FORCED
13. DO NOT POWER ON THE MOTHERBOARD BEFORE 100% DRY AFTER CLEANING OR GIVING CONTACT CLEANER
14. PUT MOTHERBOARD PILED-HEAPS
15. DO ANALYSIS MORE THAN 6 hours FOR ONE ( AVOID STRESS / DAMAGE TRACK, ELECTRIC STATIC)